|
Item Code：BTS03 |
|
Features as follows |
|
(1) Spike: without air vented ,material：ABS |
|
(2) Spike protector: material：PP |
|
(3) Air vented（Red）material：PE with 0.25μm pore size of the hydrophobic membrane |
|
(4) Drip chamber: material：PVC ; specification： 98mm |
|
(5) Blood tubular filter：medical grade PA6-6 with ABS frame; Its specification：φ17.3×62mm
wire diameter of monofilament：100±10μm；pore size：200±20μm； |
|
(6) Flow rate：The filter shall deliver no less than 1000ml of blood at(23±2)℃ in 30mins with a pressure difference of
10kPa and it shall also deliver no less than 500ml of blood in 2mins under a pressure difference of 30kPa above atmospheric pressure. |
|
(7)PVC tubing length：1.50m；Tube I.D.:3.0mm,O.D.:4.1mm；the length of short tube:200mm |
|
(8)Y injection port with Latex, heat sealing type |
|
(9)Flow regulator：material：ABS （roller wheel）：PP specification：48mm |
|
(10)Male luer lock connector：material：ABS with 6% luer lock taper conforming to international standard |
|
(11)Hypodermic needle：O.D.: 1.2mm;18G,pink,it’s length: 38mm (As your specific requirements) |
|
Options Available |
|
- with or without air vented spike |
|
- with or without hypodermic needle |
|
- Plastic frame of blood tubular filter： ABS、ABS(white)、PP、BS |
|
-Y connector with latex or latex-free |
|
- Flow regulator： 57mm、48mm、45mm |
|
- Luer lock connector：5 kinds of luer adaptor and 2 kinds of luer slip |
|
Packaging: Paper Plastic Pouch or PE package |
|
Reference Standard： ISO1135-4：2004 |
|
Certification Standard: ISO9001:2008,ISO13485:2003 |
