|
Item Code：BTS01 |
|
Features as follows |
|
(1)Spike：material：PC |
|
(2) Spike protective cap：material：PP |
|
(3) Air vent(Red)：material：PE with 0.25μm pore size of the hydrophobic membrane |
|
(4) Drip chamber：material：PVC；Specification：57mm, 20drops/ml |
|
(5) Blood tubular filter：mesh material: medical grade PA6-6；plastic frame：ABS；Specification：φ17.3×52mm
Wire diameter of monofilament：100 ±10μm,Pore size：200±20μm；Filtration rate: shall be no less than 85% |
|
(6) Flow rate: The filter shall deliver no less than 1000ml of blood at(23±2)℃ in 30mins with a pressure difference of 10kPa
and it shall also deliver no less than 500ml of blood in 2mins under a pressure difference of 30kPa above atmospheric pressure. |
|
(7)Assembly method：Injection welding |
|
(8)Tube length：1.5m,PVC；tube I.D.:3.0mm,O.D.:4.1mm; the length of short tube: 200mm |
|
(9)Y injection port：Latex |
|
(10)Flow regulator：material：ABS；Specification：57mm ,the pathway can be hung by this exquisite design |
|
(11)Male luer lock connector：ABS with 6:100 luer lock taper conforming to international standard |
|
(12)Protective cap of male luer lock：PP |
|
(13)Hypodermic needle：304 stainless steel, its specification: OD 1.20mm;18G,Pink；its length：38mm(as your specific requirement) |
|
Options Available |
|
- With or without air vented spike; |
|
- With or without hypodermic needle; |
|
- With or without “Y” injection port:：7 kinds available( latex or latex-free); |
|
- Flow regulator：material：ABS ；48mm、45mm available |
|
- 5 kind of Luer lock connector and 2 kinds of luer slip available |
|
Packaging：Paper Plastic Pouch or PE package |
|
Reference Standard： ISO1135-4：2004 |
|
Certification Standard: ISO9001:2008,ISO13485:2003 |
